WOPPER - HWRL

TECHNICAL DATA SHEET

Date of Release: 01.01.2018

Industry: Domestic

Product Code: PR20

Degreasing Agents

Shri Meera Labs Pvt Ltd

Premium hand wash concentrate.

Typical Application

Product Characteristics

International Compliance

Hand wash agent to remove tough

dirt, oils and greases

• Powerful remover of oil, dirt and

grease.

Solvent free

Pleasant sandal fragrance

Complies with all international

standards for the intended

application.

Physical & Chemical Properties

Property

Test Method

Range

Units

pH

ASTM E70 - 07(2015)

6.00-7.00

Density

ASTM D1298 - 12B(2017)

0.98 - 1.02

g/cc @ 25°C

Viscosity (Brookfield)

Appearance

Chemical nature

Ionic nature

Solubility

ASTM D2983- 17_

ASTM E2680'-'16

As per SMLPL test standard

As per SMLPL test standard

As per SMLPL test standard

200-400

Clear yellow viscous liquid

Blend of anionic surfactants_

Anionic

Soluble in water in all proportion

cSf@25°C

N/A

N/A

N/A

N/A

The above data is based on the measurements from a specific representative sample of production lot and should not be

construed as specifications.

Process Techniques & Dosage

General cleaning:

Add few drops of Wopper HWRL directly on to the wet hands, rub well and rinse thoroughly with clean water. If required,

repeat the operation until the hands are free from the soil.

Product Technical Assistance

For technical assistance & further information on this product or any other product of SMLPL, contact your SMLPL technical

service engineer at the e-mail address or telephone number given below.

admin@smlpl.com / +91-44-48615353, 9884001121

Product available Form

Product Packaging

Cases (in carton boxes)

1 L (15 units in a case), 5 L (3 units in a case)

Pails

Special package (Carbuoys)

15 L

50 L, 200 L

TECHNICAL DATA SHEET

Date of Release: 01.01.2018

Industry: Domestic

Product Code: PR20

Degreasing Agents

Shri Meera Labs Pvt Ltd

Storage & Shelf Life

Store in original container according to the manual of handling and storage from SMLPL.

Product should be stored in a dry and dust free location at temperature below 50°C and protected from direct sunlight

and heat. The storage area must be well-ventilated. Product must be kept away from incompatible materials, as

mentioned in the Material Safety Data Sheet, and food and consumable items.

Keep container tightly closed and sealed after every use. When the container is opened, it is advised to use the

contents as quickly as possible.

Do not store in unlabeled containers.

Once the container is emptied, remove all identifications from it to prevent misuse or mishandling of materials.

Product has a shelf life of at least 24 months from the date of manufacture.

Safety

The product is not classified as a hazardous material.

Please see our Material Safety Data Sheet for details on various aspects of safety, recovery and disposal of the

products. For more information, contact your SMLPL technical service personnel.

Recycling

The container can be reused after washing thoroughly with plenty of water until all the remnants have been cleansed

off. The identification on the container must be removed before reusing or recycling.

Related Documents

The following related documents are available on request, and represent various aspects on the usability, safety,

recovery and disposal of the product.

Material Safety Data Sheet

Certificate of analysis

Disclaimer

The product can be used only for the application as specified here above.

To the best of our knowledge, the information contained herein is accurate and reliable as of the date of release,

however we do not assume any liability whatsoever for the accuracy and completeness of such information.

• We make no warranties which extend beyond the description contained herein. Nothing herein shall constitute any

implied warranty of merchantability or fitness for a particular purpose.

It is the customers' responsibility to inspect and test our products in order to satisfy themselves on the suitability of the

products for their intended application. The customer is responsible for the appropriate, safe and legal use, processing

and handling of our products.

No liability can be accepted in respect of the use of our products in conjunction with other materials. The information

contained herein relates exclusively to our products when not used in conjunction with any third party materials.

CERTIFICATIONS:

MEMBERSHIP: